Water Filter Plant Machine

Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.

Chat Now

Product Details

Product Application

Product description:

Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm² through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.

Technological process

Raw water+ raw water tank+ raw water pump+ sand filter+ carbon filter+ softener (optional)+ security filter+ high pressure pump+ reverse osmosis system+ pure water tank+ UV sterilizer (ozone generator) + precision filter + water supply points Factory Secondary reverse osmosis and EDI pure water system

Advantages:

1) Can produce pure water continuously and highly automatic

2) No need chemical to regeneration,easy operation

3) RO system uses imported USA DOW membrane

4) Automatic switch on when low water level,and switch off when high water level

5) RO membrane can wash automatically and reduce pollution

6) Water shortage protection for multi-stage pump

7) Production water conductivity meter can test the monitoring quality on line contionuosly.

8) Low operation Cost and Long life span

9) It is PC program controller

10) Easily control and Maintain

11) Auto membrane flushing

12) Environmental protection, Low power consumption

13) Auto flush/backwash

14) Low /high pressure protection

Working Principle

The air will be send by air compressor into air tank, then take in air dissolved tank by jet flow device, the air will be force to dissolve into water under 0.35Mpa pressure and forming dissolved air water, then send to air flotation tank. Under the circumstance of sudden release, the air dissolved in water will be dissolve out and form vast micro bubble group, which will be fully contact the flocculating suspended matter in sewage, the suspended matter was sent by pump and flocculation after adding medicine, the ascending micro bubble group will adsorb in the flocculated suspended matter, made its density reduce and floated to water surface, thus reach the purpose of removing SS and Cod etc.

Main Feature

(1) Dissolved air pump edge bibulous the edge is inspiratory, pump pressurized mix within, gas to liquid efficient dissolving, small bubbles than 30 um.

(2) Low voltage operation, the dissolved gas efficiency is as high as 99%, release rate as high as 99%.

(3) Tiny bubbles and suspended particles of efficient adsorption, improve the SS remove effect.

(4) Dissolved gas water dissolving efficiency 80-100%, than traditional dissolved gas floating high efficiency three times.

(5) Pressure-capacity curve smooth, easy to achieve automatic control, easy to operate, easy maintenance, low noise.

Who are we?